16
When the meter is normally turned on, the alarm set limit value will display
for 2 seconds.
2
X
Y
Z
1. Press
key to turn off the meter.
2. Press and hold on
key, then press
key to turn on the
meter to enter the alarm setting mode, the “mW/m
2
” unit is flashing
displayed.
3. Press “
W
” and “
X
” keys to select the desired setting unit.
4. Press
key to enter the alarm value setting mode, the one of
four digit is flashing displayed.
5. Press “
STWX
” keys to select the desired setting value.
6. Press
key to store the new setting value and exit.
4-5-4 Setting the calibration factor (CAL)
Hold-on
Power off
+
When the meter is normally turned on, the calibration factor set value will
display for 2 seconds.