8
(6).
key
:
c
Press this key to switch to display date and time.
d
Press and hold this key while turning the meter on to the alarm
setting mode, press
key two times to exit this mode.
3
Press this key for 3 seconds to switch the alarm function on or off.
(7).
key
: Press this key to enter the current data and time setting
mode, press this key again to exit this mode.
(8).
key
:
c
Press this key to change sensor axis selector : “All axis”
→
“X axis”
→
“Y axis”
→
“Z axis”.
d
Press and hold this key while turning the meter on to switch the
device to the calibration factor setting mode, press “SET” key to exit
this mode.
(9).
key
:
c
Press this key one time to store one data set to memory.
d
Press and hold this key while turning the meter on to enter the clear
manually recorded data mode, press
key to exit this mode.
(10).
key
:
c
Press this key to switch to the manual data reading mode, press this
key again to exit this mode.
d
Press and hold this key while turning the meter on to disable the auto
power off function, the “
” symbol will disappear.
(11).
STWX
key
: Setting current date and time, datalogging interval time,
alarm setting value, calibration factor setting value, or recall manual
data memory to read memory data in cycles control keys.
