Manual
15
7 Optional Accessories
7.1 Powder test box PCE-CSM PTB
With the optional powder test box PCE-CSM PTB you can determine the colorimetric parameters of
powders.
7.1.1 Structure
The PCE-CSM PTB consists of a base plate (1), a measuring plate with a powder compartment (2), a
lens (3) and a mounting ring (4).
7.1.2 Operation
1. Calibration:
Put the lens on the white calibration plate and perform a white calibration. After that,
perform a black calibration.
2. Fill in the powder:
Fill the powder into the powder compartment of the measuring plate.
After that, put the powder test box back together (see 7.1.1). Make sure the screw joint is straight.
3. Measure:
Place the measuring hole of the colour meter on the hole of the powder test box and
perform a measurement. Make sure the colour meter is stable.
4. Clean the test box:
After using the powder test box, disassemble and clean it. If needed, you
can use alcohol for cleaning. After the cleaning, let the box dry and store it properly until the next
use.
Powder compartment
