PCE Instruments PCE-CSM 10, Руководство пользователя

Страница: 16 / 41

MANUAL
© PCE Instruments
5.1.4 Deleting a Single Record
In the popup menu under the standard record shown in Figure 15
, click “Delete Record”. It
will pop up a warning interface. Click “OK”, then the current standard and its sample records
will be deleted. If delete record in sample record interface, it will only delete a single sample
record.
5.1.5 Turning Standard Record into Measurement Standard
If you need to measure color difference under a saved standard, you can click “Standard
Entering
” in “Record Operation Interface” pop-up menu. Then the standard record is
transferred to measurement interface. Click “Sample Measure”, you can start to perform
sample measurement.
5.1.6 Turning Sample Record into Measurement Standard
In some cases, you need to use a saved sample record as a standard. You can click
“Standard Entering” in “Record Operation Interface” pop-up menu. Then, the sample record
will be transferred to measurement interface as a standard (Meanwhile, it will save as a new
standard automatically.). Click “Sample Measure”, you can start to perform sample
measurement.
5.1.7 Deleting All Records
Select “Data Delete” in main menu. It has two options: “Delete All Samples” and “Delete All
Records”
1
）
Delete All Samples
Click “Delete All Samples”. It will pop up a warning interface. Click “OK”, all sample records
will be deleted, but the standard records are still retained.
2
）
Delete All Records
Click “Delete All Records”, the records (including standard records and sample records) will
be deleted. Then, it will pop up a warning interface. Click “OK”, all records in the instrument
will be deleted permanently.
Note:
Please pay attention to this operation in case of accidentally deleting the needed
historical records.