Manual
18
5.2 Bipolar use
5.2.1 Use in closed current circuits
This method can be used in charged and uncharged circuits:
In uncharged circuits, the transmitter only sends the encoding signals to the circuit.
In charged circuits, the transmitter sends the encoding signals to the circuit, measures and also shows
the voltage of the charged circuit, as can be seen in the following figure:
ATTENTION:
Please follow the safety instructions when connecting the loaded circuits to the
transmitter.
-
The dielectric strength of the transmitter is 400 V AC / DC.
-
The use in closed circuits is suitable for searching sockets, switches, fuses etc. in electrical
installations of charged and uncharged floors.
-
The search depth depends on the medium of the ran cable and its use. It is normally less than
0.5 m.
-
Set the transmission power in order to adapt it to different search radii.
