Manual
6
5 Instructions
5.1 Measurement
Switch on the device by means of the On / Off key (1-2).
Select the desired pressure unit (mbar, mmHg, …) by pressing the UNIT key (1-6).
Carry out a zero setting by pressing the ZERO key (1-4).
Place the two fast-action plugs (1-11) on the adaptor connections (1-7 and 1-8).
The display will now show a number.
Attention:
When the pressure on connection 1 (1-7) is lower than the pressure on connection 2 (1-8), a
negative measurement result will be indicated. If it is the other way round, a positive pressure will be
displayed.
When you press HOLD (1-3) during a measurement, the current measurement value will be held in the
display and the HOLD icon will be displayed. When you press the HOLD key (1-3) again, the value will
disappear and the current measurement results will be shown again.
When you press MAX / MIN (1-5), the REC icon will appear in the display and the lowest, as well as the
highest value of a series of measurement will be recorded. When you wish to read out the maximum
value, press the MAX / MIN key (1-5) again. The maximum value along with the MAX icon will be
displayed. By pressing the MAX / MIN key (1-5) again, you will be able to see the minimum value along
with the MIN symbol in the display. You can deactivate this function by pressing and holding the MAX /
MIN key (1-5) for 2 to 3 seconds.
5.2 Auto Power Off
To save energy, the device has an Auto Power Off function. The meter will switch off automatically after
10 minutes of inactivity. This function will be disabled as soon as the display shows the REC icon for
continuous measurement.
5.3 RS-232 data interface
By means of the integrated interface jack (1-9) and the optionally available software kit (cable + software),
you can transfer your measurement results directly to a PC or laptop.
5.4 Battery replacement
Replace the 9 V battery when the low battery indicator LBT appears on the left-hand side of the display.
Remove the battery compartment cover from the back of the device with slight pressure, using your
fingernails. Then remove the used battery and replace it by a new one. Push the cover back on.
6 Disposal
For the disposal of batteries, the 2006/66/EC
directive of the European Parliament applies. Due to the
contained pollutants, batteries must not be disposed of as household waste. They must be given to
collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use them or
give them to a recycling company which disposes of the devices in line with law.
If you have any questions, please contact PCE Instruments.
