Manual
3
1 Introduction
Thank you for purchasing a PCE-910 / PCE-917 from PCE Instruments.
This differential pressure meter is especially suitable for measuring pressure and thus carrying out
preventive maintenance in hydraulic or pneumatic systems, but it can also be used in the areas of HVAC,
medical technology, pneumatics, computer applications and laboratory measurements. It is suitable for
air, non-corrosive liquids and gases. It can even be used under adverse conditions as its case is resistant
to dust and water. A silicon component prevents liquids to enter the device as well as the sensor. High-
precision measurement results are ensured as the device is controlled by a micro processor.
The differential pressure meter is calibrated at the factory and a calibration certificate from a calibration
laboratory can be ordered separately for an extra charge. The certificate has a check protocol and
contains the name of the company, which means that it can be incorporated into the company's pool of
internal test tools according to ISO standards.
2 Safety notes
Please read this manual carefully and completely before you use the device for the first time. The device
may only be used by qualified personnel and repaired by PCE Instruments personnel. There is no
warranty of damages or injuries caused by non-observance of the manual.
- The device may only be used in the approved temperature range.
-
The case should only be opened by qualified personnel of PCE Instruments.
- The instrument should never be placed with the user interface facing an object (e.g. keyboard side on a
table).
- You must not make any technical changes to the device.
- The appliance should only be cleaned with a damp cloth / use only pH-neutral cleaner.
This manual is published by PCE Instruments without any guarantee.
We expressly point to our general guarantee terms which can be found in our general terms of business.
If you have any questions please contact PCE Instruments.
