Manual
20
Note:
1. The measurement result is displayed with 5 digits (incl. digits after the decimal point).
Warning:
1. Do no measure voltage over 30V at the MEASURE jacks to avoid the damage of the PCE-789.
2.
Always make only one measurement at the same time and connect only the sockets required for
this. Disconnect all the unused sockets. Connect the measuring cable only with one socket type
(SOURCE or MEASURE or TC).
b) Setup instructions
(1) Press SETUP to enter the SETUP menu.
(2) C.J.COMP.: set the RJC.
(3) TC TYPE: Set the thermocouples.
(4) UNIT: Here you can choose between °C and °F.
