Manual
16
5.6
Voltage measurement
a) -3V ~ 24V
(1)
Turn on the device and push the slide switch to “V”.
(2) Press the S/M button to select the MEASURE (input) mode.
(3) Connect the test leads or the crocodile clamps to the MEASURE jacks (red to red, black to black)
(4) Then connect the test leads or the crocodile clamps to the object to me measured.
(5) The display of the PCE-789 shows the measured voltage value.
(6)
In order to use the data logger function, read the chapter “Data Logging”.
Note:
1. The measurement result is displayed with 5 digits (incl. decimal place)
