Photo Viewing and Measure
You can double-click the selected Photo in Photo folder to measure and view it as below
shown:
For measure, please put the magnification if there is not number. The number is the scale
value of roller at the baseline you captured this image.
Image file name: Still_yyyy-mm-dd_hhmmss_nnnx_Nxxxx is combined by date, time,
magnification and serial number. For example, Still_2009-03-06_102949_060X_N0002
figures: Number is 0002, magnification is 60, date is Mar-06-2009, time is AM10:29:49.
The program will auto load the magnification when you measured it if you put the scale
before you capture the image.
：
Open an image for measure from other folder, but the image must be captured by
PCE-MM200.
：
Save as.
：
Paint: you can draw “Line, Continuous Line, Angle, Rectangle and Circle etc into the
image.
：
Measure for “Line, Continuous Line, Rectangle, Polygon, Radius Circle, Diameter
Circle, Three Points Circle, Angle and Four Points Angle”.
