Operating PCE-MM200 digital microscope Process
The following process will show you how to operate PCE-MM200 digital microscope.
①
. To have a right image, suggested holding PCE-MM200 digital microscope as shown:
②
. Put the to-be-observed object near the PCE-MM200 digital microscope, the distance
between both (object distances) don’t exceed to 30CM.
③
. Adjust the focus: Use any finger to rotate the roller, till the image is clear.
④
. The Zoom time will be larger as PCE-MM200 digital microscope is closer to the
observed object.
⑤
. When the observed object is located at the top of the transparent cover, there are
two focus positions you can be found by rotating the roller: long cover—60X and 200X;
short Cover—80X and 150X. If you want other zoom time, you must adjust the object
distance and ever must take off the transparent cover to adjust it.
