© PCE Instruments
3
3
Amplifier Probe
Figure 1
Figure 2
3.1
Features
•
The Amplifier Probe is designed to identify and trace wires or cables within a group
without damaging the insulation.
•
Works with any Tone Generator to identify wires.
•
Volume control for increased sensitivity and adjustable to suit work environment.
•
Recessed ON/OFF button prevents battery drain.
•
Power supply is from any 9V battery with a life of approximately 100 hours.
•
An audio jack is provided for a headset.
3.2
Instructions
•
Connecting the tone generator.
In terminated working cables:
Connect one test lead to a terminated wire and the other test lead to earth or equipment
ground (See figure 2).
In unterminated or non-working cables:
Connect one test lead to an unterminated wire and the other test lead to another
unterminated wire.
