39
DE
EN
9. Cleaning and maintenance
9.1 Cleaning
CAUTION
Stop the charging process before cleaning, care
and maintenance work. In addition, disconnect
the charging cable from any connected vehicle
and place the protective cap on the charging
coupler.
You can clean the charging station as follows:
Wipe the outside of the charging station with a dry
cloth.
CAUTION
The charging station must not be cleaned with a
water or steam jet cleaner.
CAUTION
Never use aggressive cleaning agents, abrasive
materials or jet water to clean the charging sta-
tion. This may result in damage to the charging
station.
9.2 Inspection and maintenance
The charging station must be checked regularly by the
owner for defects in the charging socket or charging
coupling (including charging cable) and for damage to
the housing (visual inspection) as well as for defects,
wear and dirt on the charging socket or charging cou-
pling including charging cable.
The charging station and the associated sub-distri-
bution must be checked once a year for function and
safety by a qualified electrician as part of the periodic
inspection. The result of the inspection must be re-
corded and kept until the next inspection.
NOTE
Inspection, maintenance or repair of the
charging station may only be carried out by
qualified electricians.
9.3 Spare parts
Only original spare parts are to be used.
9.4 Contact and support
PC Electric Gesellschaft m.b.H.
Diesseits 145
4973 St. Martin im Innkreis
Telefon: +43 7751 61220
eMail: [email protected]
9.5 Disposal
NOTE
Dispose of the wallbox properly in accordance
with the country-specific regulations.
k
Electrical and electronic equipment must
be disposed of separately from general
household waste.
k
The materials are recyclable according to
their labeling.
Содержание 370100
Страница 1: ...Montage und Bedienungsanleitung EV11 Mounting and operating manual DE EN...
Страница 2: ...2...
Страница 10: ...10 DE EN 4 Ma skizzen Bohrabmessungen Montageplatte 248 337 124 183 239 6 5 M25 M25...
Страница 28: ...28 DE EN 4 Dimensional drawings drilling dimensions mounting plate 248 337 124 183 239 6 5 M25 M25...