Chapter 3
Advanced Chipset Setup Page
This page lets you set some of the timing parameters for the
system.
Trend ChipAway
Virus
This mainboard has built-in virus protection in the
firmware. Use this item to enable or disable the
built-in virus protection.
DRAM Clock
Selected
This item define the timing for DRAM memory
100 MHz or 133 MHz when system runs on a 133
MHz system bus. If system runs on 66/100 MHz,
the timing of memory will be same as the system
bus.
Bank 0/1 2/3 4/5
DRAM Timing
These three items set the timing parameters for
the memory that you have installed. Leave these
items at the default values.
SDRAM CAS#
Latency
This item determines the operation of the main
memory CAS (column address strobe). We
recommend that you leave this item at the default
value.
DRAM Integrity
Mode
Use this item to define the kind of error correction
supported by the memory that you have installed.
Graphics
Aperture Size
This item defines an aperture for the graphics.
Leave this item at the default value 64 MB.
31
