14
Saving Changes to the Echo
®
Sensor
Click the Set button next to each field to be updated to program the value in the Echo
®
Sensor. To verify the programming when all changes have been made, click the Read
Parameters button. When sensor programming is completed, click the X in the upper
right hand corner of the window.
Updating the Database to Match Sensor Programming
If the sensor has not been previously entered into the database, a message similar to the
following will be displayed. Click OK. For details on setting up the database, see the
Echo
®
Monitoring Software User’s Manual
.
A screen similar to the following will be displayed. Ignore the screen and click Finish.
This will be used when you set up the actual database.
For complete programming options, see the
Echo
®
Monitoring Software User’s Manual.
