PCB Piezotronics IMI SENSORS 682C05, Инструкция по установке и эксплуатации

Страница: 8 / 19

PAGE 3
SENSO
RS AN
D INS
TRUME
N
TATIO
N F
OR MAC
HINE
CON
DITION M
ONIT
ORIN
G
Introduction
The Model 682C05 is a 4-
20mA Din Rail Signal Conditioner designed to interface with IMI Sensor’s ICP
®
accelerometer for bearing fault detection. Specifically, the 682C05 detects high frequency impacts related to
bearing fault/lube starvation and provides a 4-20mA signal proportional to the magnitude of vibration. From the
same sensor, the device also converts overall vibration to a 4-20mA signal, which is used for traditional machine
diagnostics and predictive maintenance such as out of balance and misalignment.
General Features

Early detection of high frequency impact faults related to bearing failure and lube starvation.

External transmitters, signal conditioners, and ICP ® power supplies can be eliminated by direct
connection of the sensor to the Din Rail Signal Conditioner.

18Vdc/4mA excitation to power sensor.

Dual 4-20mA Output Signals for Bearing Fault and Overall Vibration.

Selectable High Pass filtering for Bearing Fault Detection.

Overall Output Vibration Ranges include:
Acceleration (g’s)
Velocity (in/sec)
5.00 0.50
10.00 1.00
20.00 2.00

Internal DIP switch selection for Peak or RMS on Overall Vibration.

Analog output signal connections (RV) for conducting additional frequency analysis.

Removable Terminal Blocks for easy wiring.

35mm (1.38in.) Din Rail Mount configuration.

Space saving 22.5mm (0.9in.) wide design.