PCB Piezotronics IMI SENSORS 640B06, Инструкция по установке и эксплуатации

Страница: 20 / 21

Model Number
640B06
LOOP POWERED, CURRENT OUTPUT, INDUSTRIAL VIBRATION SENSOR
Revision: A
ECN #: 49753
P erfo rm an ce EN G L ISH SI
Measurement Range 0.0 to 0.5 in/sec pk 0.0 to 12.7 mm/s pk [1]
Output 4-20 mA 4-20 mA
Frequency Range(± 3 dB) 90 to 60 kcpm 1.5 to 1 kHz [2][3]
Broadband Resolution 0.005 in/sec pk 0.13 mm/s pk [4]
Non-Linearity ± 1 % ± 1 %
En viro n m en tal
Temperature Range -40 to 185 °F -40 to 85 °C
Enclosure Rating IP68 IP68
Electrical
Excitation Voltage 12 to 30 VDC 12 to 30 VDC
Load Resistance 50 (Vs-12) Ohm 50 (Vs-12) Ohm
Settling Time(within 2% of value) < 30 sec < 30 sec
Electrical Isolation(Case)
> 10
8
Ohm > 10
8
Ohm
P h ysical
Size - Hex 1.0 in 25.4 mm
Size - Height 2.6 in 66 mm
Weight 4.7 oz 131 gm
Mounting Thread 1/4-28 UNF No Metric Equivalent
Mounting Torque 3 to 5 ft-lb 4 to 7 Nm
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Stainless Steel Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015
Electrical Connection Position Top Top
Electrical Connections(Pin A) 4-20 mA Pos (+) 4-20 mA Pos (+)
Electrical Connections (Pin B) 4-20 mA Neg (-) 4-20 mA Neg (-)
[5]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Piezotronics, Inc.
M - Metric Mount
Supplied Accessory: Model M081A61 Mounting Stud 1/4-28 to M6 X 1 (1)
OP TION A L VERSION S
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
N OTES:
[1]Conversion Factor 1 in/sec = 0.0254 m/sec.
[2]Current will fluctuate at frequencies below 5 Hz.
[3]1Hz = 60 cpm (cycles per minute).
[4]Typical.
[5]See PCB Declaration of Conformance PS039 for details.
Date: 07/24/2019 Date: 07/24/2019 Date: 07/24/2019 Date: 07/24/2019 48134
Entered: LK Engineer: NJF Sales: MC Approved: NJF Spec Number:
P h o n e: 800-959-4464
F ax: 716-684-3823
E-M ail: im i@ p cb .co m
3425 Walden Avenue, Depew, NY 14043
SU P P L IED A C C ESSORIES:
Model M081A61 Mounting Stud 1/4-28 to M6 X 1 (1)
Model 081A40 Mounting Stud (1)
Model ICS-6 NIST traceable single axis amplitude response calibration from 10 Hz to upper
+/- 3dB point. (1)