Model Number
356A63
TRIAXIAL ICP® ACCELEROMETER
Revision: C
ECN #: 42197
Performance
ENGLISH
SI
Sensitivity(± 15 %)
10 mV/g
1.02 mV/(m/s²)
Measurement Range
± 500 g pk
± 4905 m/s² pk
Frequency Range(-5 %)
2 to 4000 Hz
2 to 4000 Hz
[3]
Resonant Frequency
≥
55 kHz
≥
55 kHz
Electrical Filter Roll-off
6 dB/octave
6 dB/octave
[1]
Electrical Filter Corner Frequency
15 kHz
15 kHz
[1]
Broadband Resolution(1 to 10,000 Hz)
0.008 g rms
0.08 m/s² rms
[1]
Non-Linearity
≤
1 %
≤
1 %
[4]
Transverse Sensitivity
≤
5 %
≤
5 %
Environmental
Overload Limit(Shock)
± 10,000 g pk
± 98,100 m/s² pk
Temperature Range(Operating)
-65 to +250 °F
-54 to +121 °C
[2]
Temperature Response
See Graph
See Graph
[2]
Electrical
Excitation Voltage
18 to 30 VDC
18 to 30 VDC
Constant Current Excitation
2 to 20 mA
2 to 20 mA
Output Impedance
≤
200 Ohm
≤
200 Ohm
Output Bias Voltage
7 to 12 VDC
7 to 12 VDC
Discharge Time Constant
0.3 to 1.0 sec
0.3 to 1.0 sec
Settling Time(within 10% of bias)
<3 sec
<3 sec
Spectral Noise(1 Hz)
445 µg/
√
Hz
4365 (µm/sec
2
)/
√
Hz
[1]
Spectral Noise
(10 Hz)
135 µg/
√
Hz
1325 (µm/sec
2
)/
√
Hz
[1]
Spectral Noise
(100 Hz)
90 µg/
√
Hz
883 (µm/sec
2
)/
√
Hz
[1]
Spectral Noise
(1 kHz)
80 µg/
√
Hz
785 (µm/sec
2
)/
√
Hz
[1]
Physical
Sensing Element
Ceramic
Ceramic
Sensing Geometry
Shear
Shear
Housing Material
Titanium
Titanium
Sealing
Hermetic
Hermetic
Size (Height x Length x Width)
0.40 in x 0.77 in x 0.40 in
10.2 mm x 19.6 mm x 10.2 mm
Weight
0.19 oz
5.3 gm
[1]
Electrical Connector
1/4-28 4-Pin
1/4-28 4-Pin
Electrical Connection Position
Side
Side
Mounting Thread
5-40 Female
5-40 Female
Mounting Torque
4 to 5
45 to 56
[5]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
HT
- High temperature, extends normal operation temperatures
Temperature Range(Operating)
-65 to +325 °F
-54 to +163 °C
Supplied Accessory : Model 080A Adhesive Mounting Base (1)
Supplied Accessory : Model 081A27 Mounting Stud (5-40 to 5-40) (1)
Supplied Accessory : Model 081A90 Mounting stud, 10-32 to 5-40 (1)
Supplied Accessory : Model M081A27 Metric mounting stud, 5-40 to M3 x 0.50 long (1)
NOTES:
[1] Typical.
[2] 250° F to 325° F data valid with HT option only.
[3] All axes filtered to provide -5% between 4,000 and 6,000 Hz.
[4] Zero-based, least-squares, straight line method.
[5] See PCB Declaration of Conformance PS023 for details.
SUPPLIED ACCESSORIES:
Model 080A Adhesive Mounting Base (1)
Model 080A109 Petro Wax (1)
Model 081A27 Mounting Stud (5-40 to 5-40) (1)
Model 081A90 Mounting stud, 10-32 to 5-40 (1)
Model ACS-1T NIST traceable triaxial amplitude response, 10 Hz to upper 5% frequency. (1)
Model M081A27 Metric mounting stud, 5-40 to M3 x 0.50 long (1)
Entered: AP
Engineer: JJB
Sales: WDC
Approved: JJB
Spec Number:
Date: 11/8/2013
Date: 11/8/2013
Date: 11/8/2013
Date: 11/8/2013
19955
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
