PC Partner P4X266EAS4-258E, Руководство пользователя

Страница: 14 / 16

14 14
14 14
14
Technical Reference Booklet
Set Supervisor/ Changes, sets, or disables password. It allows you to limit
User Password access to the system and the Setup Program.
Save & Exit Saves value changes to CMOS and exits setup.
Setup
Exit Without Abandons all CMOS value changes and exits setup.
Saving
Standard CMOS Features Standard CMOS Features
Standard CMOS Features Standard CMOS Features
Standard CMOS Features
The items in Standard CMOS Setup Menu are divided into 10 categories. Each category
includes one or more setup items. Use the arrow keys to highlight the item and then use
the <PgUp> or <PgDn> key to select the desired value in each item.
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features
Date (mm :
d d
:yy) Mon. May 21 2001 Item Help
Time (
h h
:mm:
ss
) 11 : 1 : 35
Menu Level
8
8
IDE Primary Master [Press Enter 4303 MB]
8
IDE Primary Slave [None] Change the day, month,
8
IDE Secondary Master [None] year and century
8
IDE Secondary Slave [None]
Drive A [1.44M, 3.5 in.]
Drive B [None]
Video [EGA/VGA]
Halt on [All Errors]
Base Memory 640K
Extended Memory 30720K
Total Memory 31744K
éêèç
: Move Enter
: /-/PU/PD : Value F10 : Save ESC : Exit F1 : General Help
F5 : Previous Values F6 : Fail-Safe Defaults F7 : Optimized Defaults
(Note : The figures of BIOS Setup Menu included here only show a typical
case, and may not be exactly the same as the one on your unit.)
Date The date format is <day-of-the-week>. <month> <day> <year>.
T i m e The time format is <hour> <Minute> <second> displayed in
24-hour military-time clock. For example, 1 p. m. is displayed
as 13:00:00.
IDE Primary These categories identify the types of the two channels that
Master/Slave have been installed in the computer.
IDE Secondary
Master/Slave
If the controller of the HDD interface is SCSI, the selection shall
be “None”.
Drive A / This category identifies the types of floppy disk drive A or drive
Drive B B that has been installed in the computer.
Video The default setting is EGA/VGA.
Halt on You can select which type of error will cause the system to halt.