PC Partner P4X266EAS4-258E, Руководство пользователя

Страница: 12 / 16

12 12
12 12
12
Technical Reference Booklet
BIOS Setup BIOS Setup BIOS Setup BIOS Setup BIOS Setup
This chapter discusses Award’s Setup Program built into the ROM BIOS. The Setup
Program allows users to modify the basic system configuration. This special information
is then stored in battery-backed RAM, which retains the setup information when the
power is turned off.
Starting Setup Starting Setup
Starting Setup Starting Setup Starting Setup
The Award BIOS is immediately activated when you turn on the computer. The BIOS
reads the system information contained in the CMOS and begins the process of checking
out the system and configuring it. When it finishes, the BIOS will seek an operating
system on one of the disks and then launch and turn control over to the operating
system.
While the BIOS is in control, the Setup Program can be activated :
1. By pressing <Del> immediately after switching the system on, or
2. By pressing the <Del> key when the following message appears briefly at
the bottom of the screen during the POST (Power On Self Test )
Press DEL to enter SETUP Press DEL to enter SETUP Press DEL to enter SETUP Press DEL to enter SETUP Press DEL to enter SETUP
If the message disappears before you can respond and you still wish to enter Setup,
restart the system to try again by turning it OFF then ON or pressing the “RESET” button
on the system case. You may also restart by simultaneously pressing the <Ctrl>, <Alt>,
and <Delete> keys. If you do not press the keys at the correct time and the system does
not reset, an error message will be displayed and you will again be asked to ...
PRESS F1 TO CONTINUE, DEL TO ENTER SETUP PRESS F1 TO CONTINUE, DEL TO ENTER SETUP PRESS F1 TO CONTINUE, DEL TO ENTER SETUP PRESS F1 TO CONTINUE, DEL TO ENTER SETUP PRESS F1 TO CONTINUE, DEL TO ENTER SETUP
Getting Help Getting Help
Getting Help Getting Help Getting Help
Press F1 to pop up a small help window that describes the appropriate keys to use and
the possible selections for the highlighted item. To exit the Help Window press <Esc> or
the F1 key again.
In Case of Problems In Case of Problems
In Case of Problems In Case of Problems In Case of Problems
If, after making and saving system changes with the Setup Program, you discover that
your computer does not reset, use the Award BIOS defaults to override the CMOS
settings.