10
10
10
10
10
Technical Reference Booklet
Checking the mounting post
of your computer
Please check your computer
chassis if it is carrying any metal
mounting post at this location.
Remove the mounting post or
add insulation to the post before
putting in the motherboard.
CA
CA
CA
CA
CAUTION
UTION
UTION
UTION
UTION
Clip
Clip
DIMM
DIMM Socket
Notch
Hardware Setup
Hardware Setup
Hardware Setup
Hardware Setup
Hardware Setup
To Install DIMMs
To Install DIMMs
To Install DIMMs
To Install DIMMs
To Install DIMMs
1.
Locate the DIMM sockets.
2.
Holding the DIMM by the edges, remove it from its antistatic package.
3.
Make sure the clips at either end of the socket are pushed away from the socket.
4. Position the DIMM above the socket. Align the two small notches in the bottom
edge of the DIMM with the keys in the socket.
5.
Insert the bottom edge of the DIMM into the socket.
6.
When the DIMM is seated, push down on the top edge of the DIMM until the retaining
clips at the ends of the socket snap into place. Make sure the clips are firmly in
place.
Please turn off system before installing and removing any
device, otherwise you’ll cause the system damage.
