3
HARDWARE CONFIGURATION
The motherboard is based on the VIA® Apollo Pro 133 Chipset. The chipset is
a highly integrated solution enabling a high performance motherboard and
desktop design for the Pentium® II/III processor. The main board supports
standard DIMM module, 66/100/133MHz DIMM module or Registered DIMM
module. The features on board include Super-I/O, Ultra DMA33/66(optional)
for PCI bus master IDE, AGP 2.0 compliance, PCI 2.1 compliance, USB, VRM
8.4 compliance, ECC, on-board sound system (optional).
Key Features
Motherboard PCB
4 Layer Micro ATX size PCB with surface mounted devices(SMD) for all
components except a small amount discrete components. PCB board size is
244 x 173mm.
Processor
•
Full support for Intel
®
Pentium
®
II & Pentium
®
III and Deschutes
®
processors
using Slot 1 connector.
•
Support bus speed of 66/100/133MHz, this includes all Pentium
®
II &
Pentium
®
III processors from 233MHz to 600MHz and future processors.
CPU Speed Setting
•
Jumper setting or no jumper is needed to set for various speed of CPU
(Factory optional).
VRM 8.4 (Voltage Regulator Modules) on Board
•
Flexible motherboard design with on-board VRM 8.4, easy to upgrade
with Intel’s
®
Future Overdrive
®
processors.
Cache
•
Pentium
®
II and Pentium
®
III Processor built-in L2 cache (The TAGRAM
and two or four BSRAMS for 256KB or 512KB).
System Memory
•
A total of three 168-pin DIMM sockets.
•
Supports Synchronous DRAM at 66/100/133MHZ.
•
Supports Symmetrical and Asymmetrical DRAM addressing.
•
Memory size up to 768Mbytes.
•
Supports single density DIMMs of 1M, 2M, 4M, 8M and 16M depth(x64 or x72).
•
Supports double density DIMMs of 2M, 4M, 8M, 16M and 32M depth (x64
or 72).
•
Supports single & double sided DIMMs.
•
Supports Error Checking and Correction(ECC) using parity DRAM modules.
On-Board I/O
•
Two PCI IDE ports supporting up to 4 ATA, ATA2 and Ultra DMA33
(Optional DMA66 & DMA66 Cable) IDE HDDs, CD-ROMs, ZIP drives
and LS-120 drives as boot devices.
Hardware Setup