background image

12

Technical Reference Booklet

Installing the Processor

For easy installation of the CPU, it is recommended that you
remove all Cards in PCI slots first.

Unpack the CPU and identify the pin 1 corner of the CPU.

Match pin 1 of the CPU with pin 1 of the CPU socket. The pin 1 corner of
the CPU socket is designated by a small triangle printed on the motherboard.

Carefully insert the CPU into the CPU socket and move the metal arm
downward to replace it in its original position. Change any jumper settings
as detailed in the manual.

The small circle marked on the top of the CPU designates the pin 1 corner.
If a heat sink is attached and covers the top of the CPU, identify the pin 1
corner by turning the CPU over. Locate the small gold finger that extends
from one corner of the large central square portion of the CPU. The gold
finger points towards pin 1, which is also uniquely identified by a square pad.

Positioning the CPU incorrectly in the socket can permanently damage
the CPU and the computer when you turn on the system.

Warning:

There is a fan attached the CPU to prevent the overheating, please
ensure that the fan can operate. Otherwise the CPU can overheat
and cause damage to both CPU and motherboard.

Содержание 35889700 Series





















Отзывы: