PC Partner 35889700 Series, Руководство пользователя

Страница: 11 / 20

11
DIMM 1 DIMM 2 Total
Empty 8MB 8MB
Empty 16MB 16MB
Empty 32MB 32MB
Empty 64MB 64MB
Empty 128MB 128MB
8MB Empty 8MB
8MB 8MB 16MB
8MB 16MB 24MB
8MB 32MB 40MB
8MB 64MB 72MB
8MB 128MB 136MB
16MB Empty 16MB
16MB 8MB 24MB
16MB 16MB 32MB
16MB 32MB 48MB
16MB 64MB 80MB
16MB 128MB 144MB
Installation
Installing a DRAM Module
To install a DRAM module,
•
Determine the desired amount of memory and acquire the necessary
DRAM modules.
• Note that a DRAM module has a polarity notch at one end so that it
fits into a socket only one way. Hold the module by the edges. Do not
touch the shiny contacts.
• Align the DRAM module edge connector with the slot at the center of the
socket.
• Position the DRAM module to the left of the socket and press the DRAM
module edge connector firmly into the socket.
If you have misaligned or only partially seated the module, remove the
DRAM module gently and reinstall it.
Hardware Setup
Warning:
Turn system power off before installing and removing any device,
otherwise you’ll cause the system damage.
Memory Configuration
The memory combinations. The motherboard will support Extended Data Output
(EDO), Burst Extended Data Output (BEDO) and Synchronous DRAM (SDRAM)
DIMMs.
DIMM Configurations
DIMM 1 DIMM 2 Total
32MB Empty 32MB
32MB 8MB 40MB
32MB 16MB 48MB
32MB 32MB 64MB
32MB 64MB 96MB
32MB 128MB 160MB
64MB Empty 64MB
64MB 8MB 72MB
64MB 16MB 80MB
64MB 32MB 96MB
64MB 64MB 128MB
64MB 128MB 192MB
128MB Empty 128MB
128MB 8MB 136MB
128MB 16MB 144MB
128MB 32MB 160MB
128MB 64MB 192MB
128MB 128MB 256MB