30
Motherboard User’s Guide
CPU Over-clocking Func.
This item decides the CPU over-clocking function/frequencyinstalled in your
system. If the over-clocking fails, please turn offthe system power. And then,
hold the PageUp key (similar to theClear CMOS function) and turn on the power,
the BIOS willrecover the safe default.
CPU Frequency
This item indicates the current CPU frequency. Users can not make any change to
this item. Please noted that the frequency will be varied with different CPU.
Auto Detect DIMM/PCI Clk
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI
slots.
S
pread Spectrum
If you enable spread spectrum, it can significantly reduce the EMI (Electro-
Magnetic interface) generated by the system.
Load Default Settings
This option opens a dialog box to ask if you are sure to install optimized
defaults or not. You select [OK], and then <Enter>, the Setup Utility loads all
default values; or select [Cancel], and then <Enter>, the Setup Utility does not
load default values.
Note
: It is highly recommend that users enter this option to load optimal default
values for accessing the best performance.
Supervisor Password Page
This page helps you set up some parameters for the hardware monitoring
function of this motherboard.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
Supervisor Password
Help Item
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
Supervisor Password : Not Installed
Change Supervisor Password
Installed or Change the
password
Press Enter
Supervisor Password
This item indicates whether a supervisor password has been set. If the password
has been installed , Installed displays. If not, Not Installed dispalys.
