12
Motherboard User’s Guide
Pin
Signal
Pin
Signal
1
HD)
2
FP PWR/SLP(+)
3
HD_LED_N(-)
4
FP PWR/SLP(-)
5
RESET_SW_N(-)
6
POWE)
7
RESE)
8
POWER_SW_N(-)
9
RSVD_DNU
10
KEY
Here is a list of the PANEL1 pin assignments.
Install the Motherboard
Install the motherboard in a system chassis (case). The board is a Micro ATX
size motherboard. You can install this motherboard in an ATX case. Make sure
your case has an I/O cover plate matching the ports on this motherboard.
Install the motherboard in a case. Follow the case manufacturer’s instructions to
use the hardware and internal mounting points on the chassis.
Connect the power connector from the power supply to the
ATX1
connector on
the motherboard. The
ATX_12V1
is a +12V connector for CPU Vcore power.
If there is a cooling fan installed in the system chassis, connect the cable from the
cooling fan to the
SYS_FAN
fan power connector on the motherboard.
Connect the case switches and indicator LEDs to the
PANEL1
header.
