Paytec Apex 7000, Руководство пользователя

Страница: 10 / 12

10
Step 5: Cleaning internal components
Directly above the plate inside the validator, there is another set four round and oval lenses that beam back and
forth to each other in the bill path plate as seen in the image below. Dampen a lint free cloth with water, only
enough water to pick up dust and run the cloth over all lenses and rollers until clean.
NOTICE: Sidescan, grey lenses and cash box sensor
Use the images below to locate the side scan anti stringing, grey lenses and cash box sensor. Be sure to keep
these lenses clean and debris free. If smoke or dirt builds up in these areas, bill acceptance and performance will
lower and bill rejects will become more frequent. In certain cases water may not be enough to clean the surfaces.
We recommend a solution of water and alcool (80% water and 20% alcool). This solution can also be used to
clean the drive belts if they are extremely dirty.
** NEVER USE OILS, BENZENE OR SILICON SPRAY ON ANY PART OF THE ACCEPTOR **
REAR CASH BOX
SENSOR
GRAY SCALE LENS