PAX A920 Pro
Configuration and Installation
Copyright © 2021 PayFacto Inc.
Page 8 of 20
•
•
The terminal requires a network connection to communicate with the payment processor server to
process transactions.
The PAX A920 Pro is a mobile payment terminal that can connect to mobile (LTE) and wireless (Wi-Fi)
networks.
Mobile network access is required for delivery and transportation use, but it can also serve as a backup
connection if your Wi-Fi network reception is unreliable in certain areas.
Installing the SIM Card
Configuring the Terminal Wi-Fi Connection
If you plan to use your terminal outside of your usual wi-fi network, you need to install the mobile SIM
card, provided by PayFacto or your mobile communications provider. The SIM card will connect you to a
mobile network, allowing you to process payments anywhere the terminal has reception. Mobile network
access can also serve as a backup connection if your wi-fi network reception is unreliable in certain
areas. The terminal uses the
micro-SIM
card size.
NOTE: If you plan to use your terminal only on your wi-fi
network, you can skip this procedure and proceed directly
to
Configuring the Terminal Wi-Fi Connection
.
To install the mobile SIM card:
Make sure the terminal is powered off and turn the terminal over.
1.
On the back of the terminal at the bottom, slide the battery cover locking switch to the
right.
2.
Lift the battery cover off the terminal.
3.
Lift the battery from the terminal to remove and set aside.
4.
