PAX A920 Pro
Configuration and Installation
Copyright © 2021 PayFacto Inc.
Page 9 of 20
The terminal should identify the SIM card and configure the mobile network settings automatically.
This section explains how to turn Wi-Fi on and connect to your network.
To connect to your wireless network:
The terminal has illustrations for the different cards it can accept. Insert your SIM card
in the space identified as
SIM1
so the diagonal corner is facing the top left side.
IMPORTANT! The SIM card goes into the lower space and
should not require great force to insert.
5.
Re-install the battery and push on the bottom of the battery to seat it correctly.
6.
Re-install the battery cover on the terminal and slide the lock switch to the lock
position on the left.
7.
Power on the terminal by pressing and holding the
Power
button for 3 seconds.
8.
