Paxton Net2 PaxLock Скачать руководство пользователя страница 5

Страница: 5 / 7

PAGE 5

Presenting a valid user token to the unit will cause the LED to briefly flash Green and the door will unlock.

The presentation of a barred or unknown user token is indicted by a Red LED display.

The external handle is only engaged once access has been granted. The inside handle is always engaged.

Normal Operation - LED Indications

Software configuration

Reader

: Local settings for the reader.

Output

: Configures the lock for timed release or toggle mode.

Alarm

: Enables/Disables the door alarm functions.

(requires contact switch)

Events

: Shows the events for this control unit only.

Access Rights

: Lists users who have access through this door.

Door name

: Name the Door.

Door open time

: Set the door open time.

Unlock the Door during

: Holds the door unlocked during this

timezone. - Set to 'At No Time' for normal user operation.

Red flash
Red and Green flash together

A valid user card has been presented and the handle is engaged
An invalid user card has been presented - No access granted

LED indications

Green flash

The unit is configuring - Please wait.

The access control unit connects to the Net2 software running on the PC using Paxton Net2Air proprietary

wireless technology. A Net2Air bridge enables communication from the Net2 software to the Paxton wireless

products.

Radio signals do not always behave as you might expect. For example, a cell phone that displays a full signal on

one part of the site will lose signal completely only a few feet away. These problems can be addressed by using

the Net2 site surveyor kit (690-200-US)

Содержание Net2 PaxLock








Результаты поиска

Содержание Net2 PaxLock

Отзывы:

Похожие инструкции для Net2 PaxLock

Бренды по названию

Популярные бренды

Paxton Net2 PaxLock, Инструкция

Результаты поиска

Содержание Net2 PaxLock

Отзывы:

Похожие инструкции для Net2 PaxLock

Бренды по названию

Популярные бренды