Command Parameter
^GD
Does not convert 203 dpi measurements in formats.
^GE
Converts dot measurements in formats from 203 dpi to 300 dpi
measurements.
^ID or
^ICd
Disables the Immediate Command feature by turning
off the
Immediate Command escape character. Sets the Immediate
Command escape character to the ASCII value given by the
d
parameter. The value can be any ASCII character.
^MC
Returns the customer ID or RPQ version to the host. (
00
to
99
)
^MD
Returns the printhead dot density to the host. 00 = 203 dpi
01 = 300 dpi
^MI
Returns the customer ID or RPQ revision level to the host. (
00
to
99
)
^MM
Returns the model number to the host. 06 = M9820
07 = M9830 08 = M9835 09 = M9840 10 = M9856
11 = M9403 15 = M9805
^MP
Returns the prototype number to the host. (
00
to
99
)
^MR
Returns the revision number to the host. (
00
to
99
)
^MV
Returns the version number to the host. (
00
to
99
)
^PR
Resets the printer. This command takes five seconds to
complete and then the printer is ready to receive data. It has
the same effect as turning off and then turning on the printer.
NOTE:
Command should be used only when the printer is
not
printing.
^RB
Repeats the last printed batch, printing the same number of
labels as specified in the original batch. This command does
not work if using batch separators.
NOTE:
Printer ignores this command if printing.
^RS
Resynchronizes supply when supply roll is changed.
NOTE:
Printer ignores this command if printing.
^SD or
^Scd
Disables the status polling feature by turning off the status
polling control character. Sets the status polling control
character to the ASCII value given by the
d
parameter. The
value of
d
can be any ASCII character.
^TP
Prints a test label set.
NOTE:
Printer ignores this command
if printing
.
The table represents the defined immediate command control
character as
^
and the defined status polling control character as
d
. You may define these characters to suit your needs. To use
the immediate command control character or the status polling
character within your data, use the tilde sequence.
Using Advanced Features
B-7
Содержание 9830-CL
