1 For your safety
4
99473903xNA – V02
2011/11
1.3
Qualification of the installer
Installation and commissioning of this equipment should
be done by qualified installers [Specialist] in accordance
with local, state and federal codes which may be
applicable.
The following must also be observed during installation
and commissioning:
•
Relevant regional and national regulations (for
example Occupational Safety and Health Act)
•
Relevant accident prevention regulations (for
example of the Employer's Liability Insurance
Association)
•
Instructions and safety instructions mentioned in
this manual
1.4
Hand-over of the system [Specialist]
After installation and start-up, the installer is responsible
for familiarizing the end user with the functions of the
system and the basic safety measures.
¾
Hand the manual over to the end user. Instruct
the end user to keep the manual in close
proximity to the system.
¾
Instruct the end user to have the zone module
serviced and repaired by a specialist only. The
zone module does not contain any parts which
may be repaired by the end user.
¾
Explain to the end user the functions of the
system and the safety devices. Point out to the
end user that the shell must remain mounted
during operation and that the ball valves must be
open.
