Pavailler Rubis 2, Руководство пользователя

Страница: 23 / 52

RUBIS 2/4 OVENS
26800 Portes-Lès-Valence – France
17
7) Operation of the baking timer
This function can only be executed if this module is energized (see paragraph
1) Powering Up, Stop ).
a – Setting the baking time
When pressing the button (8) the LED blinks for 5 seconds (MIN). To set the
baking time change the time shown on display (C) between 1 to 59 min using
the buttons (3) or (4) while the LED is blinking. After 5 seconds or by pressing
the button (8) again the change is validated.
b - Baking time countdown
Press Start (9): The LED lights up and the time is counted every minute. At
the time value 0 min the buzzer sounds. Pressing the Start button (9) switches
off the buzzer and resets the display (C) to the previous time (the baking timer
does not affect the oven operation whatsoever).
8) Use of start or automatic start-up modes
Before programming the oven, set the setpoint temperatures to the value you
wish to reach when the oven starts at the end of the delay time. The automatic
start-up function can only be run if the module is powered off (see section 1),
only the LED (1) is lit.
a - Setting the automatic start-up
When pressing the button (8) the displays (C) light up and the LED (H) blinks
for 5 seconds (MIN).
To set the automatic start-up time, change the time shown on display (C)
between 1 to 99 hours by means of the buttons (3) or (4) while the LED is
blinking.
After 5 seconds or by pressing the button (8) again the change is validated
and the display (C) and the LED turn off.
b - Automatic start-up countdown
Hold the Start (9) button pressed for 3 seconds, the display (C) and the LED
(H) light up, the time is counted every hour. At the time value 00 the module is
switched off and the oven heats up with the configured temperature values.
To set an identical automatic start-up again, press the Start button (9). To
stop an automatic start-up switch the oven on by pressing button (1).