©
Paulson Manufacturing Corporation 2020 Errors and technical changes reserved
Page 4 of 5
Permitted Spare Parts:
Product Code / Part Number:
Cap Bracket for Slotted Caps with US slots …………………
CB2-HD*
9004860
Cap Bracket for Slotted Caps with EURO slots ……………..
CB2-HD-CT
9004870
Cap Bracket for Slotted or Un-slotted Caps …………………
CB6-HD
9005212
Replacement Face Shield ……………………………………..
QVGHC-6
2040124
Replacement Face Shield ……………………………………..
QVGHCFM-6
2040125
Replacement Face Shield ……………………………………..
QVGHCFM-4
2030100
* NOTE: CB2-HD is also available with further clip types.
11. Inspection Criteria and Determination of End of Useful Life
Inspect and replace any damaged or worn components. Never re-use the
PAULSON Heat Reflective
Quick View Shield
or Base Shield, if any replacement criteria delineated above is fulfilled.
The
PAULSON Heat Reflective Quick View Shield
is made from high quality materials by leading
manufacturing processes and designed for long term use (5 years). Nevertheless, like any other product
made from plastic or plastic alloys, it suffers from typical combinations of daily work factors, such as UV
radiation, contact with oil and lubes, scratches and mechanical impacts like all plastic products.
Therefore, PAULSON recommends replacing the shield in case one of the replacement criteria listed in
Chapter 10 is fulfilled. For reasons of safety the user is requested to track the time of use and to consider
a safe time for replacement. This is a general safety recommendation and independent to the PAULSON
protective technology.
12. Standards
The
PAULSON Heat Reflective Quick View Shield
is tested and certified to EN 166:2001 and 171: 2002
and comply with Annex II of PPE Regulation 2016/425.
13. CE Marking
The marking is the same for all
PAULSON Heat Reflective Quick View Shields
described in this
document:
QVGHC-6, QVGHCFM-6, QVGHCFM-4: 4-2.5 PMC 1 B 9 CE 1883
4
IR filter as per EN 171
2.5
IR protection level: VLT (17,8 % = < VLT < 29,1 %),
averaged spectral transmission as per EN 171:2002, Clause 5.2, Table 1
in the wave length range between 780 nm and 1400 nm 2,9%,
in the wave length range between 780 nm and 2000 nm 32,3% ,
typical radiation source up to 1150°C as per EN 171:2002, Annex B.1
PMC
Manufacturer code (PAULSON Manufacturing Corporation)
1
Optical class
B
Medium energy impact (high speed test; 6 mm steel ball at 120 m/s at room
temperature)
9
Protection against molten metals and hot solids as per EN 166:2001, Cl. 7.2.3
CE 1883
CE Mark with ID number of Notified Body as per
PPE Regulation (EU) 2016/425, Article 17 required for Cat. III products.
NOTE: Also consider the separate Base Shield marking.
14. Manufacturing Month and Lot Number
Underneath the pad printed label you find a sticker with work order number of your Arc Shield kit. It
comprises the manufacturing date and the lot number within this month, e.g. '1808-4356', where the first
two digits represent the manufacturing year (here 2018), the next two digits show the manufacturing
month (here August), followed by a dash and a consecutive four digit lot number (here 4356).
