©
Paulson Manufacturing Corporation 2020 Errors and technical changes reserved
Page 3 of 5
7. Compatibility list
All brackets, Quick View Shields and Base Shields can be combined as you like. Examples:
CB2-HD-CT + QVGHCFM-4
CB2-HD + QVGHCFM-6 + IM9-L6F
CB6-HD + QVGHC-6 + IM22-L6F
Bracket
Quick View
Base Shield
CB2-HD
9004860
QVGHC-6
2040124
none
CB2-HD-CT
9004870
QVGHCFM-6
2040125
IM22-L6F
2119840
CH6-HD
9005212
QVGHCFM-4
2030100
IM9-L6F
2107600
NOTE: Always also read the user instruction of the Base Shield, if mounted!
8. Cleaning
Clean and inspect the
PAULSON Heat Reflective Quick View Shield
after and prior to each use with a
damp cloth unless heavily soiled. Should further cleaning be required, clean with mild soap and water and
pat dry. If necessary for cleaning and inspection, disassemble the
PAULSON Heat Reflective Quick View
Shield
from the helmet bracket. Make sure that before usage all components are correctly re-assembled!
9. Storing
For best results store the
PAULSON Heat Reflective Quick View Shield
in a protective bag as used by
PAULSON. (
NOTE
: Various other packing materials may contain solvents which could decrease the level
of protection.) Store the
PAULSON Heat Reflective Quick View Shield
out of sunlight in a clean, dry
environment. The storage temperature shall be between 0°C and 35°C.
Do not expose the
PAULSON Heat Reflective Quick View Shield
to any arc welding operation.
10. Maintenance, Repair and Replacement
If the visor will not remain in the stowed position, re-tighten the pivot screws at the sides.
The
PAULSON Heat Reflective Quick View Shield
must be replaced if it:
is significantly scratched, especial the gold coating is defected
has been exposed to chemicals, oils or lubes*
is damaged by mechanical impact*
has reached its normal life span (see also Chapter 11)*
*Damages caused by the aforementioned incidents may not be visible to the end user.
Original PAULSON components and replacement parts shall be used.
