Paul FOCUS 200 Base, Руководство по эксплуатации

Страница: 15 / 40

15
The packaging of the device may only be removed immediately before assembly! Prior to
and during assembly interruptions, the open air duct connection stubs must be protected
with the caps of the air connection against ingress of construction dust and moisture!
Checking of the scope of delivery 3.1.2
If you detect any damages or incompletion to/of the delivered product, please contact the supplier
immediately. The scope of delivery includes:

HRU FOCUS with 230 V power cable,
Check the type plate and make sure that it is the correct device ( version / design);

Mounting sheet with 2 pieces of self-adhesive rubber buffer;

Control panel;

Operating manual;

Mounting frame (option).
Mounting 3.2
The FOCUS has to be mounted horizontally. During the wall mounting check the required load capacity of
the wall construction (dead load of FOCUS 25 kg) and the safe mounting option of the mounting sheet.
For inapplicable walls we recommend to apply the mounting frame for installation on the floor (available
as an option). In this way possible transmissions of structure-born noise are avoided as good as possible.
Ensure that a minimum clearance of 1 meter remains in front of the FOCUS for
subsequent maintenance works.
Wall mounting 3.2.1
Thereby, processed the wall mounting as follows:
1. Mount the delivered mounting sheet A with the tongues B , which point upwards, horizontally to the
wall. Take advantage of the long-quencher C for fixation by suitable fastening material.
Fig 9: Mounting sheet for wall mounting
Note depending on the installation location, the required minimum clearances to
finished floor!
A
B
C