2
Congratulations on the purchase of your new PaceSetter Patty
Molding Machine from Patty-O-Matic, Inc! The PaceSetter will form,
interleave paper between, and stack food patties. This machine is designed
for easy operation and cleaning. Please become familiar with this manual
and your machine will give you years of service.
The PaceSetter is shipped to you in at least two cartons which contain
the patty machine, feed tray, mold plate guard, riser platform, parts box,
receiving table, and this manual. If you purchased your machine with any
other accessories, such as a mobile table or patty paper, these items may be
in a separate carton. The parts box that comes with the machine should
include a bottle of machine lubricant, a speed driver, samples of patty paper,
and a spare parts kit.
Your machine is equipped with two interlocks. One is located on the
front of the machine and one is located on the top of the machine. The Mold
Plate Guard must be installed on the machine to engage the interlock on the
front of the machine, and the Feed Tray including the Guard must be
installed on top of the Hopper to engage the interlock on top of the machine.
Mold Plate
Guard Knobs
Plunger and Key
Latch Interlock
Push Rod
and Collar
Installing Machine onto
Riser Platform
Place machine on the riser platform
making sure the 4 legs of the machine
go into the 4 leg wells on the Riser
Platform. The Picture shown shows
the front view of the Riser Platform.
Leg Wells
Installing the Mold Plate Guard
Loosen Guard Knobs on the hopper and
slip Mold Plate Guard under the fender
washers located under the knobs.
Tighten down on Guard Knobs. To
Activate the interlock switch, slide push
rod against the plunger, inside the
keylatch, and turn rod to the right. This
will lock the push rod in place and
activate your interlock switch.
Interlock Tower
Hopper
Feed Tray
Stainless
Steel Tube
DO NOT ATTEMPT TO OVERRIDE INTERLOCKS OR RUN
THIS MACHINE WITHOUT THE FEED TRAY AND THE
MOLD PLATE GUARD IN THEIR PLACE!! FAILURE TO DO
SO COULD RESULT IN SERIOUS BODILY INJURIES!!
Mold Plate
Guard
Installing the Feed Tray
Place stainless steel tube of Feed Tray over
the hopper. The Tray will push down on
the safety interlock Tower located on the
top of the Machine. The picture shows one
of the many available Feed Trays.
Riser
Platform
