2
ForeFront 6400 Bundles Quick Start Guide
1.0 Powering up the ForeFront Router chassis
Your 6400 ForeFront Router bundle comes with AC or DC power supplies.
1.1 AC power supplies
1.
If your 6400 ForeFront Router bundle is equipped with a 6276 2U chassis, refer to section “Installing the
power cables—AC unit” on page 37 of the
Model 6276 ForeFront Half-Pipe Chassis Assembly User Guide
available online at
www.patton.com/manuals/6276_UG.pdf
.
2.
If your 6400 ForeFront Router bundle is equipped with a 6476 4U chassis, refer to section “Installing the
power cables—AC unit” on page 36 of the
Model 6476 ForeFront FullPipe Chassis Assembly User Guide
available online at
www.patton.com/manuals/6476_UG.pdf
.
• The Model 6400 ForeFront Router Bundles contains power modules
and cards which may be removed to send for repair. However the
individual modules and cards contain no user serviceable parts. The
equipment shall be returned to Patton Electronics for repairs, or
repaired by qualified service personnel.
• For DC powered units, an approved external power source that incor-
porates a disconnect device shall be used and positioned within easy
reach of the operator.
• For AC powered units, the power cable used to connect the power
supply shall meet all applicable standards for the country in which it
is to be installed, and be connected to a wall outlet which has
earth ground.
• Line voltages are present within the power supply when the power
cords are connected. The mains outlet that is utilized to power the
devise shall be within 10 feet (3 meters) of the device, shall be easily
accessible, and protected by a circuit breaker.
• Hazardous network voltages are present in WAN ports regardless of
whether power to the unit is ON or OFF. To avoid electric shock, use
caution when near WAN ports. When detaching the cables, detach the
end away from the ForeFront chassis first.
• Do not work on the system or connect or disconnect cables during
periods of lightning activity.
The interconnecting cables shall be acceptable for external use and shall be rated for
the proper application with respect to voltage, current, anticipated temperature, flam-
mability, and mechanical serviceability.
WARNING
CAUTION
