Patton electronics 3324, Руководство по началу работы

Страница: 53 / 85

Administrator 53
Model 3324 User Guide 3 • Configuring the 3324 for operation
9. Using this page to set the outgoing frames are VLAN-Tagged frames or no. Then click Apply.
– Tag: outgoing frames with VLAN-Tagged.
– Un-tag: outgoing frames without VLAN-Tagged.
Port VID
Do the following to configure port VID settings:
From the main Tag-based (IEEE 802.1Q) VLAN page, click Port VID Settings.
1. Click administrator
2. Click VLAN configuration
3. Click Port VID and that will take you to the page below ( figure 23 )
Figure 23. Port VID menu screen
4. Set the port VLAN ID that will be assigned to untagged traffic on a given port. This feature is useful for
accommodating devices that you want to participate in the VLAN but that don’t support tagging. Each
port of the Model 3324 allows the user to set one PVID, the range is 1~255 and the default PVID is 1.
The PVID must as same as the VLAN ID that the port belong to VLAN group, or the untagged traffic will
be dropped.
Ingress Filtering
Ingress filtering allows frames belonging to a specific VLAN to be forwarded if the port belongs to that VLAN.
The Model 3324 has two ingress filtering rules:
• Ingress Filtering Rule 1: Forward only packets with VID matching this port's configured VID.
• Ingress Filtering Rule 2: Drop Untagged Frame.
Spanning Tree Protocol Settings
Spanning-Tree Protocol (STP) is a standardized method (IEEE 802.1D ) for avoiding loops in switched net-
works. When STP is enabled, it ensures that only one path at a time is active between any two nodes on the
network. You can enable Spanning-Tree Protocol through the web management’s Switch Setting Advanced