Patton electronics 3324, Руководство по началу работы

Страница: 29 / 85

Introduction 29
Model 3324 User Guide 3 • Configuring the 3324 for operation
Introduction
This chapter contains the following procedures for configuring the Model 3324 for operation:
• “Configuration prerequisites”—lists the items you need to have on hand before configuring the 3324.
• “Initial Configuration through the RS-232 Control Port” on page XX—describes setting up the 3324’s
LAN IP address, netmask, and gateway parameters.
• “Using a Web browser to complete Model 3324 configuration” on page XX—describes the process to com-
plete the software installation parameters—that is, to bring it on-line. The steps are:
- Setting the switch features
- Setting the console port
- Setting the VSDL port controls
- Trunking (LACP)
- Forwarding and filtering database
- Setting VLAN configurations
- Spanning tree
- Port sniffer
- SNMP management
- Security manager
- 802.1X system configuration
- TFTP updates
- Backup configuration
- Reset and Reboot
• “Saving your configuration” on page 47—tells you how to save the configuration settings.
• “Completing the installation” on page 49—describes testing the 3324 to verify that it is fully operational.
Configuration prerequisites
You will need the following to configure the Model 3324:
• A PC that includes the following:
- RS-232/V.24 serial port
- VT-100 terminal program, e.g., HyperTerminal
- Ethernet port
- Web browser (e.g., Microsoft Internet Explorer)
• You will need the following information to configure the Model 3324:
- The IP address and subnet mask for the 3324’s Ethernet port