Patton electronics 3324, Руководство по началу работы

Страница: 44 / 85

3 • Configuring the 3324 for operation Model 3324 User Guide
44 Administrator
Flow Control
• Full: User can set flow control function is enable or disable in full mode.
• Half: User can set backpressure is enable or disable in half mode.
Trunking
The link aggregation control protocol (LACP) provides a standardized means for exchanging information
between Partner Systems on a link. Link aggregation lets you group up to eight consecutive ports into a single
dedicated connection. This feature can expand bandwidth to a device on the network. LACP operation
requires full-duplex mode, more detail information refers to IEEE802.3ad.
System Priority
This is the value used to identify the active LACP. The 3324/Switch with the lowest value has the highest pri-
ority and is selected as the active LACP. There are six steps to activate LACP.
1. Group ID: There are seven trunk groups to provided configure. Choose the "group id" and click "Get".
2. LACP: If enabled, the group is LACP static trunking group. If disabled, the group is local static trunking
group All ports support LACP dynamic trunking group. If connecting to the device that also supports
LACP, the LACP dynamic trunking group will be created automatically.
3. Work Ports: Allows a maximum of four ports to be aggregated at the same time. If the LACP static
trunking group exceeds the 4 port maximum it will set to standby, and will aggregate if the work ports
fail. If local static trunking group is set, the number must be as same as the group member ports.
4. Select the ports to join the trunking group. A maximum of four ports can be aggregated at the same time.
5. If LACP is enabled, you can configure LACP Active/Passive status for each port on State Activity page.
6. Click Apply.