69
configure userdatabase createuser X
Creates new users in the user database by specifying a user name,
password, and privilege.
Accessibility: READ/WRITE
Default: user database empty!
Valid Entries: user name (up to 32 characters), password (up to 32 char-
acters), privilege (user, admin, both)
configure userdatabase deleteall
Deletes the entire user database with a single command.
Accessibility: N/A
Default: N/A
Valid Entries: N/A
configure userdatabase deleteuser X
Deletes individual users in the user database by specifying the user
name.
Accessibility: N/A
Default: N/A
Valid Entries: user name (up to 32 characters)
configure userdatabase modifyuser X
Modifies the password or privilege of individual users in the user data-
base.
Accessibility: N/A
Default: N/A
Valid Entries: user name (up to 32 characters), new or current password
(up to 32 characters), new or current privilege (user, admin, both).
B.4 EIAONCLOSE COMMANDS
eiaconclose
Remotely closes the connection to the serial interface.
Accessibility: N/A
Default: N/A
Valid Entries: N/A
Note
This may be needed if the inactivity timeout feature is disabled.
B.5 FTP COMMANDS
ftp
Enables the 2120 to communicate with FTP servers over the LAN for
viewing and downloading files (i.e. new 2120 software releases).
Accessibility: N/A
Default: N/A
Valid Entries: N/A
Note
See “Software Installation Instructions” on page 46.
