3.0
INSTALLATION
The Patton Model 2002 is very simple to install. Just plug it in like
a normal cable and you're ready to go. Since the Model 2002 is
available in two gender and DTE/DCE orientations, many applications
are possible.
NOTE:
The Model 2002 Series always uses a DB-25 female
connector on the RS-232 interface and a DB-25 male connector on
the TTL Interface.
4.1 CONNECTING THE MODEL 2002FC-MT
Connect the 25 pin male port (TTL side) directly to a TTL DCE
device. Connect the 25 pin female port (RS-232 side) of Model
2002FC-MT to an RS-232 DTE device using a straight-through cable of
the shortest possible length (less than 50 feet). Figure 8 shows a
typical application of the 2002FC-MT.
4.2 CONNECTING THE MODEL 2002FT-MC
Connect the 25 pin male port (TTL side) directly to a TTL DTE
device. Connect the 25 pin female port (RS-232 side) of the Model
2202FT-FC to an RS-232 DCE device using a straight-through cable of
the shortest possible length (less than 50 feet). Figure 9 shows the
typical application of the 2002FT-MC.
9
Figure 9
. Connecting the Model 2002FT-MC
APPENDIX A
MODEL 2002 SERIES SPECIFICATIONS
Transmission Format:
Asynchronous
Data Rate:
0 to 230 kbps
Interface:
Serial TTL or serial RS-232; DCE-to-
DTE or DTE- to-DCE
Connectors:
RS-232 interface, DB-25 female; TTL
interface, DB-25 male
Control Signals Supported:
CD, DTR, DSR, CTS and RTS, passed
directly through
Signal Inversion:
data signals and control signals can be
independently configured for “inverting”
or “non-inverting” using internal
jumpering
Power Supply:
none required, draws all necessary
operating power from RS-232 and TTL
data and control signals
Temperature Range:
32 to 122ºF (0 to 50º C)
Dimensions:
2.2" x 2.1" x 0.7" (5.6 x 5.3 x 1.8 cm)
10
Figure 8
: Connecting the Model 2002FC-MT
RS-232
DTE
RS-232
DCE
TTL DCE
TTL DTE
2002FC-MT
2002FT-MC
Содержание 2002 Series
Страница 16: ......
