3
4
1.2 SERVICE
All warranty and non-warranty repairs must be returned freight pre-
paid and insured to Patton Electronics. All returns must have a Return
Materials Authorization number on the outside of the shipping contain-
er. This number may be obtained from Patton Electronics Technical
Service.
telephone: (301) 975-1007,
web address: http://www.patton.com;
email: [email protected].
Patton Electronics’ technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model 1065RC. Technical Service hours: 8AM to 5PM EST, Monday
through Friday.
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected by Patton’s qualified tech-
nicians. If any questions or problems arise during installation or use of
this product, please do not hesitate to contact Patton Electronics
Technical Support at (301) 975-1007.
2.1 FEATURES
• Synchronous or asynchronous operation
• 2-wire/half duplex or 4-wire/full or half duplex
• V.52 & V.54 test modes
• Equalization
• Anti-streaming timer
• Data rates to 64.0 kbps
• Distances up to 12 miles (19.2 km)
• Point-to-point or multipoint
• Internal, external or received loopback clocking
• Built-in transformer isolation & high speed surge protection
• Mono-color LED indicators
• 2000VAC transformer isolation
• Mounts in Patton’s 14-card rack chassis
2.2 DESCRIPTION
The Model 1065RC Series Universal Short Range Modem oper-
ates 2-wire (half duplex) or 4-wire (full or half duplex), in synchronous
or asynchronous modes at an extended range of 12 miles. It operates
at data rates to 64.0 kbps. The Model 1065RC
always operates in
sync. mode between the local and remote modems; when connected to
an async. RS-232 device, the Model 1065RC converts the async. data
to sync. data
The Model 1065RC has several features to enhance overall per-
formance: equalization, antistreaming timer, transformer isolation and
Silicon Avalanche Diode surge protection. The Model 1065RC features
V.52 compliant bit error rate pattern tests and two V.54 test modes.
The Model 1065RC is designed to mount in Patton’s 2U high 19”
rack chassis. This 14-card chassis has a switchable 120VAC/240VAC
power supply and mounts cards in a mid-plane architecture. The front
card can be plugged into different rear cards. This means that the
Model 1065RC card can have several interface options and can be
switched with other Patton short haul cards.
NOTE:
Packages received without an RMA number will
not be accepted.
