EN
87
FIT BIT
Open the chuck ring
2
until the bit fits
into the chuck.
1
Once the battery is fully charged, press
the battery release switch
12
and slide
off the battery seat.
2
ATTACH BATTERY
Slide the drill driver onto the battery.
1
Fit the bit into the chuck
1
and tighten
the chuck ring
2
securely. Set the de-
sired torque at the torque ring
6
.
Remove the bit by opening the chuck
ring
2
.
2
To release the battery, press the bat-
tery release switch
12
and slide off the
drill driver.
2
FIT DRILL
Open the chuck ring
2
until the drill fits
into the chuck and set the torque ring
6
to drill .
1
Fit the drill into the chuck
1
and tighten
the chuck ring
2
securely.
Remove the drill by opening the chuck
ring
2
.
2
ROTATION DIRECTION
To drive in screws or drill, set the rota-
tion direction switch to
.
1
To loosen screws, set the rotation di-
rection switch to
.
2
Caution!
If the drill driver is not in
use, centre the rotation direction
switch, in order to lock the drill driver.
Caution!
Only use the provided bat-
tery with the drill driver.
CHARGE BATTERY
Slide the battery seat onto the battery.
Plug in the battery adaptor and check
its LED:
Green
Before charging
Red
During charging
Green
Fully charged
1
Caution!
Before changing bits, cen-
tre the rotation direction switch, in
order to lock the drill driver.
Caution!
Before changing drills,
centre the rotation direction switch,
in order to lock the drill driver.