
EN
86
2
CHARGER SET-UP
Plug the battery adaptor plug into the
battery seat.
1
Using the tool
1.
Set the desired rotation speed on the gear
selector
10
.
1
st
gear
Screw driving /
Larger diameter drilling
2
nd
gear
Smaller diameter drilling
2.
To switch on the tool, press the on / off
switch
4
. The deeper the on / off switch
4
is pressed, the faster the drill driver ro-
tates.
3.
Make sure your workpiece can not slip.
Start working, while holding the tool
firmly.
4.
To switch off the tool, release the on / off
switch
4
.
Intended Use
The tool is intended for driving in and loos-
ening screws as well as for drilling in wood,
metal, ceramic and plastic. The tool is not in-
tended for commercial use.
Any other use or modification to the tool is
considered as improper use and could cause
considerable dangers.
Product overview
1
Chuck
2
Chuck ring
3
LED
4
On / Off switch
5
Bit holder and Bit
6
Torque ring
7
Rotation direction switch
8
Battery power check
9
Battery
10
Gear selector
11
Soft grip
12
Battery release switch
Caution!
Only use the provided bat-
tery adaptor and battery seat in or-
der to charge the battery.
Caution!
If the drill driver is not in
use, centre the rotation direction
switch, in order to lock the drill driver.
Battery power
Press the battery power check button
8
to
check the remaining battery power:
Red, Yellow, Green
80-100 %
Red, Yellow
40-79 %
Red
0-39 %