EN
130
1
2
1
2
1
2
1
2
1.
2.
1.
2.
FIT BONNET
Place the machine upside down on
its handle
2
. Fit the bonnet
1
over the
foam pad
4
.
Caution!
Make sure the tool is
switched off and the battery re-
moved.
1
Make sure that the elastic strip of the
bonnet
1
is securely tucked on the un-
derside of the foam pad
4
.
Do not use the same bonnet for met-
al and coated surfaces.
2
SWITCH ON
To switch on the tool, push the on/ off
switch
6
forward. The switch locks in
on position.
Warning!
Only switch on the tool
when the foam pad is in full contact
with the surface.
1
SWITCH OFF
To switch off the tool, pull the on/off
switch downward. The switch unlocks
and the tool turns off.
Warning!
Switch off the tool before
removing it from the surface.
2
APPLY SOLID POLISHING AGENT
Apply a proper amount of polishing
agent to the bonnet
1
.
Smoothen with a putty knife or flat ob-
ject over the entire surface of the bon-
net
1
.
1
APPLY LIQUID POLISHING AGENT
Apply three swirls of the liquid polishing
agent to the bonnet
1
.
2
To release the battery, press the bat-
tery release switch
7
and slide off the
battery from the tool.
2
ATTACH BATTERY
Make sure the tool is switched off. Slide
the battery
5
(not included) onto the
tool until it clicks into place.
Caution!
Only use the batteries
specified in technical data.
1
