-10-
Instructions For Operation
Installing auxiliary handle
CAUTION:
Always be sure that the tool is switched off and unplugged before adjusting or checking
function on the tool.
The screws must be tightened to avoid dangerous loose in the process of using the
machine
Align the hole of the handle connecting plate
with the hole on the
back of the upper guard
complete, and
fasten the handle connecting
plate to the upper guard complete with screws,
tighten the screws clockwise, then fasten the
auxiliary handle in the hole of the handle
connecting plate.(
Fig.8
)
1. Upper Guard Complete 3. screw
2. handle connecting plate. 4. auxiliary handle
Adjusting Depth of Cut
CAUTION:
Use a shallow depth of cut when cutting thin
workpiece for cleaner, safer cuts.
After adjusting the depth of cut, always
tighten the lever securely.
Hold the handle with one hand and loosen the
lever on the depth guide with the other. Move
the base up or down. At a desired depth of cut, secure the base by tightening the lever. (
Fig. 9
)
Содержание ACS11-185
