PATTA ACS11-185, Руководство по эксплуатации

Страница: 12 / 40

-11-
Bevel Cutting
Loosen the wing nut on the bevel gauge in front,
and tilt the tool to the desired angle for bevel cut
(0-45°). Secure the wing nut on the bevel gauge
tightly after making the adjustment. (
Fig. 10 )
Sighting
For straight cuts, align the right notch on the
front of the base with the cutting line on the
workpiece. For 45° bevel cuts, align the left
notch with it. (
Fig. 11
)
Switch Action
CAUTION:
Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the “OFF” position when released.
To prevent the switch trigger from being
accidentally pulled, a lock-off button is provided
as a safety feature.
To start the tool, push in the lock-off button and
pull the switch trigger. Release the switch trigger to stop. (
Fig. 12 )
Removing or Installing Saw Blade
CAUTION:
 Always be sure that the tool is switched off and unplugged before installing or removing
the saw blade.

Do not use saw blades which do not comply with the characteristics specified in these
instructions.

Be sure the blade is installed with teeth pointing forward in the same direction as the tool
rotation (the arrow on the blade should point in the same direction as the arrow on the
tool).