background image

 3

 

NOTICE 

Gas floor model fryers are intended for commercial use only. Not for household use. 
Warranty will be void if service work is performed by other than a qualified technician, or if other than 

genuine replacement parts are installed. 
Be sure this Operator’s Manual and important papers are given to the proper authority to retain for 

future reference. 

Congratulations!  You  have  purchased  one  of  the  finest  pieces  of  commercial  cooking  equipment  on  the 

market. 
You will find that your new equipment, has been designed and manufactured to meet the toughest standards 

in the industry. Each equipment is carefully engineered and designs are verified through laboratory tests and 

field installations. With proper care and field maintenance, you will experience years of reliable, trouble-free 

operation

. For best results, read this manual carefully.

 

RETAIN THIS MANUAL FOR FUTURE REFERENCE. 

MODELS 

This manual is for Gas floor model  Fryers with 40 lbs, 50 lbs and 90 lbs  capacity frypots.  The capacity is 

described on the serial plate that is located inside the front door on the left side. 

Table of Contents 

Specifications ......................................................................................................................... 4

 

Installation .............................................................................................................................. 5

 

Operation .............................................................................................................................. 12

 

Cooking Hints ....................................................................................................................... 14

 

Cleaning ............................................................................................................................... 14

 

Service  (for authorized service technician only) .................................................................. 16

 

Parts ..................................................................................................................................... 20

 

Read  these  instructions  carefully  before  attempting  installation.  Installation  and  initial  startup  should  be 

performed  by  a  qualified  installer.  Unless  the  installation  instructions  for  this  product  are  followed  by  a 

qualified service technician (a person experienced in and knowledgeable with the installation of commercial 

gas  and/or  electric  cooking  equipment)  then  the  terms  and  conditions  on  the  Manufacturer’s  Limited 

Warranty will be rendered void and no warranty of any kind shall apply. 

Содержание PT-F3-NG

























Отзывы: